20B011-00 (MEN MIKRO)

The B11 is a high-speed PowerPC based VMEbus card with complete single-board computing functionality. It is optimized for industrial requirements in control and instrumentation in terms of functionality, environmental conditions and cost. The B11 is especially prepared for all types of industrial qualification such as extended temperature range (-40..+85°C), shock, vibration, humidity etc. The computing core of the B11 is the powerful MPC8245 Kahlua II processor with its internal PowerPC 603 and 300MHz clock frequency. The B11 is equipped with one SO-DIMM SDRAM slot, a CompactFlash slot and soldered boot Flash. This guarantees maximum flexibility in memory configuration. The B11 hosts two serial interfaces, IDE hard-disk controller, keyboard, mouse and USB as well as a realtime clock and watchdog. Two local PC•MIP mezzanine slots are available for flexible and individual workstation I/O extensions such as Ethernet, graphics, SCSI, additional serial lines, field busses etc. The non-transparent PCI-to-VME bridge is a very fast and cost-competitive inhouse design. Using a dual-ported SRAM, the B11 speeds up to a transfer rate of 7MB/s for master single cycle operations and up to 13MB/s for slave burst operations. Despite the full functionality of the B11 and even with 2 PC•MIP slots, the complete CPU card needs only one 3U slot in a VMEbus system.