cPCI-6760D/P8 (ADLINK)

Build-in housing for 2.5” low profile HDD

Design for low power or mobile BGA2 Pentium-III CPU running at FSB 100MHz

On-board highperformance AGP 2x VGA display output by SMI SM721 controller

PICMG 2.0 CompactPCI Specification R.3.0 Compliant

PICMG 2.1 CompactPCI Hot Swap Specification R1.0 Compliant

PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant

Self-hot-swap status indication

Standard 6U form factor, 1-slot (4TE/HP) width

Supports 14 bus-master PCI devices on CompactPCI bus peripheral slots (not available with cPCI-R6760S)

Supports CompactFlash type-II socket via removable daughter board

Supports external Ultra-160 SCSI interface (only available when collocating with cPCI-R6760S)

Supports Intel pre-boot execution environment (PXE) for boot from LAN

Supports rear I/O configuration

Supports remote console on Serial ports

Supports self-hot-swap operation by soft triggering system power off

Supports up to 2 USB ports, 2 serial port, 1 parallel port

Supports up to dual 10/100Mb Ethernet ports (up to four 10/100Mb Ethernet ports when collocated with cPCI-R6760S)

Two 144-pin SO-DIMM socket supports up to 512MB PC-100 SD-RAM with optional ECC support

WDT status indication

Not Available