Product Catalog

The P16 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, PXI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers. The P16 provides dual Ethernet functionality with a 1000V isolation for telecom applications (e. g. routers) as well as for industrial applications (e. g. second Ethernet as fieldbus). The P16 features two Intel 82559 Ethernet controllers, supporting 10/100Base-T via two RJ45 connectors at the front panel. The PC-MIP offers full-duplex support. The MAC address is stored in an onboard serial EEPROM.

P16

Brand: MEN MIKRO

Availability: Available

Men Mikro 15P016-00 Mezzanine Card - P16, PC-MIP Type II (with front I/O), dual fast 100Base-T Ethernet, 0..+60°C

15P016-00

Brand: MEN MIKRO

Availability: Available

P16, PC-MIP Type II (with front I/O), dual fast 100Base-T Ethernet, -40..+85°C

15P016-01

Brand: MEN MIKRO

Availability: Available

P16, PC-MIP Type II (with front I/O), dual fast 100Base-T Ethernet, 0..+60°C, 2 LEDs at front

15P016-02

Brand: MEN MIKRO

Availability: Available

Brand: MEN MIKRO

Availability: Available

15P016-EU

Brand: MEN MIKRO

Availability: Available

The P15 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, PXI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers. The P15 can be used to store non-volatile data. The memory is implemented in FRAM technology (Ferroelectric Random Access Memory). FRAMs are proprietary high-performance semiconductors that retain information even when power is lost. For this technology no batteries are required - and maintenance problems are solved. Access times are the same as for standard static SRAM, so there is no delay at write access as for EEPROM or Flash. The number of write cycles is also nearly unlimited (10 billion read/writes).

P15

Brand: MEN MIKRO

Availability: Available

P15, PC-MIP Type I (no front I/O), no rear I/O, non-volatile FRAM 512KB, -40..+85°C

15P015-00

Brand: MEN MIKRO

Availability: Available

P15, PC-MIP Type I (no front I/O), no rear I/O, non-volatile FRAM 256KB, -40..+85°C

15P015-01

Brand: MEN MIKRO

Availability: Available

Brand: MEN MIKRO

Availability: Available

The P14 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, PXI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers. The P14 PC-MIP is a 400-Mbps controller for the IEEE 1394 High Performance Serial Bus, also known as FireWire (TM Apple) and i.LINK (TM Sony). The IEEE 1394 defines a high-speed next-generation network topology and protocol. Guaranteed bandwidth is provided for mission critical applications and make the P14 a fast, reliable and universal interconnection between computers and I/O devices. The P14 is provided with an integrated LLC/PHY chip, being fully compatible to OHCI-based software (implicit part of the MS Windows operating systems as of Windows 98SE and Windows 2000). The data transfer rate is specified at 400Mbits/s (200/100Mbits/s). When sourced by the 6-pin 1394 connector with integrated power distribution, peripheral devices attached to the P14 need no separate power supply. Live connect/disconnect, digital video and audio processing or high-speed data storage systems are typical applications for the P14.

P14

Brand: MEN MIKRO

Availability: Available

P14, PC-MIP Type II (front I/O), IEEE1394 FireWire, OHCI PHY/Link Layer Controller TI TSB43AA22, 400Mbits/s

15P014-00

Brand: MEN MIKRO

Availability: Available

Brand: MEN MIKRO

Availability: Available

Men Mikro P13 48-bit TTL I/O Interface PC-MIP

P13

Brand: MEN MIKRO

Availability: Available

P13, PC-MIP Type I (no front I/O), 48-bit TTL I/O

15P013-00

Brand: MEN MIKRO

Availability: Available

P13, PC-MIP Type I (no front I/O), 48-bit TTL I/O, -40..+85°C

15P013-02

Brand: MEN MIKRO

Availability: Available

P13, PC-MIP Type II (front I/O), 48-bit TTL I/O

15P013-03

Brand: MEN MIKRO

Availability: Available

P13, PC-MIP Type II (front I/O), 48-bit TTL I/O, -40..+85°C

15P013-04

Brand: MEN MIKRO

Availability: Available

PC-MIP cable, 4m, two 36-pin half-pitch D-Sub plugs/housings

05P013-01

Brand: MEN MIKRO

Availability: Available

MDIS4/2004 low-level driver sources for P13

13P013-06

Brand: MEN MIKRO

Availability: Available

MDIS4/2004 Windows NT4/W2K driver for P13

13P013-70

Brand: MEN MIKRO

Availability: Available

Brand: MEN MIKRO

Availability: Available

Application Note: MDIS4 under LabWindows/CVI

21APPN001

Brand: MEN MIKRO

Availability: Available

15P013-EU

Brand: MEN MIKRO

Availability: Available

The P12 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, PXI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers. The P12 adds standard Ethernet functionality with a high 1.5kVrms isolation to all types of industrial applications from small embedded-system up to high-end workstation configurations. The P12 features the fast 21143 Ethernet controller, supporting 10/100Base-T via an RJ45 connector at the front panel. The PC-MIP offers full duplex support and the MAC address in an onboard serial EEPROM

P12

Brand: MEN MIKRO

Availability: Available

P12, PC-MIP Type II (front I/O), 21143 Ethernet controller, 10/100Mbit/s, 100Base-T, RJ45

15P012-00

Brand: MEN MIKRO

Availability: Available

P12, PC-MIP Type II (front I/O), 21143 Ethernet controller, 10/100Mbit/s, 100Base-T, RJ45, -40..+85°C

15P012-02

Brand: MEN MIKRO

Availability: Available

Brand: MEN MIKRO

Availability: Available

15P012-EU

Brand: MEN MIKRO

Availability: Available

The P11 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, PXI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers. The P11 is a high-performance quadruple UART with RS422/485 interface. Each 16C950 UART channel has 128-deep transmit and receive FIFOs, with readable levels and user-defined thresholds. All UARTs are capable of delivering up to 15Mbps asynchronous data throughput simultaneously, and are software-compatible with commonly used 16C450, 550, 650 and 750 UARTs. The UARTs support Big Endian byte-lane conversion, 5, 6, 7, 8 and 9 bit data framing and Infra-red (IrDA) receiver and transmitter. The P11 is supplied with a RS422/485 line interface at the front and via the carrier board connector. It supports 4-wire full duplex transmission.

P11

Brand: MEN MIKRO

Availability: Available

P11, PC-MIP Type II (front I/O), quad RS422/485 UART, 16450-compatible, with 128-byte FIFO

15P011-00

Brand: MEN MIKRO

Availability: Available

PC-MIP cable, 2m, with 26-pin half-pitch 26-pin D-Sub plug/housing to pig tail

05P002-00

Brand: MEN MIKRO

Availability: Available

SCF driver for P10/P11 M-Module, OS-9(PPC), PowerPC object code

13P010-01

Brand: MEN MIKRO

Availability: Available

VxWorks driver for P10/P11

13P010-60

Brand: MEN MIKRO

Availability: Available

WindowsNT: UART driver for P10/P11/AD45

13P010-70

Brand: MEN MIKRO

Availability: Available

Brand: MEN MIKRO

Availability: Available

Application Note: Using P10/P11/AD45 under Linux

21APPN008

Brand: MEN MIKRO

Availability: Available

15P011-EU

Brand: MEN MIKRO

Availability: Available

The P10 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, PXI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers. The P10 is a high-performance quadruple UART with RS232 interface. Each 16C950 UART channel has 128-deep transmit and receive FIFOs, with readable levels and user-defined thresholds. All UARTs are capable of delivering up to 15Mbps asynchronous data throughput simultaneously, and are software-compatible with commonly used 16C450, 550, 650 and 750 UARTs. The UARTs support Big Endian byte-lane conversion, 5, 6, 7, 8 and 9 bit data framing and Infra-red (IrDA) receiver and transmitter as well as several other sophisticated functions for high-end serial communication requirements. The P10 is supplied with RS232 line physics at the front and alternatively with TTL-level signals via the carrier board connector. This permits you to connect "SA adapters" with different line drivers (TTY, RS485 etc.) in a CPCI system via rear I/O.

P10

Brand: MEN MIKRO

Availability: Available

P10, PC-MIP Type II (front I/O), quad RS232 UART, 16450 compatible with 128-byte FIFO

15P010-00

Brand: MEN MIKRO

Availability: Available

Brand: MEN MIKRO

Availability: Available

15P010-EU

Brand: MEN MIKRO

Availability: Available

16.5-30W AC-DC Single Output and Medical Desktop Power Supply

MES30A

Brand: MEAN WELL

Availability: Available

Moxa DE-311/110V NPort Express | Single port RS-232/422/485 Device Server | Enable Your Serial Devices to be Internet Ready!

DE-311/110V

Brand: MOXA

Availability: Available

Moxa DE-311/230V NPort Express | Single port RS-232/422/485 Device Server | Enable Your Serial Devices to be Internet Ready!

DE-311/230V

Brand: MOXA

Availability: Available

Moxa DK-35A DIN-Rail Mounting Kit (35 mm)

DK-35A

Brand: MOXA

Availability: Available

Male DB9 DIN-Rail Wiring Terminal

TB-M9

Brand: MOXA

Availability: Available

Moxa DE-211/110V Serial Device Servers - 1 port RS-232/422/485 universal serial device server.

DE-211/110V

Brand: MOXA

Availability: Available

1 port RS-232/422/485 universal serial device server.

DE-211/230V

Brand: MOXA

Availability: Available